Zebra DS2278 Scanner

Zebra DS2278 Scanner

The Zebra DS2278 Scanner can be used via Bluetooth for Native iOS and Android, as well as via USB for Android. It works with POS Version 5.3 (1.7.5) or higher.

Set Up Bluetooth

  1. Sign into POS, then select Operations > QR Scanners.

  2. Enable the Enable QR Code Scanners (slid to the right and turned pink).


    1. If this is the first time you're connecting this scanner to this device: scan the Barcode on the box and the Scanner will appear on the list.


  3. When the Scanner appears on the list: touch the line item of the Scanner and it will ask you to pair.


  4. Press Pair and it will connect the Scanner to the Terminal. The Scanner will now be connected to the Terminal, marked with a pink check mark.




To Pair Another Scanner to the Device

  1. Force Close the app.

  2. Go into iPad Settings > Bluetooth. The ds2278 is not connected.

  3. Press the small (i) then choose Forget Device. This will allow you to Pair another scanner to this terminal. (


Set Up USB (Android)

  1. Plug the cable into a USB port. The Select device type pop-up appears.


  2. Select the Avoid scanning interruption option, then press Save.

  3. Select System, then Languages & input.


  4. On the Languages & input screen, select Physical keyboard.



  5. On the Physical keyboard screen, enable the Use on-screen keyboard toggle (slide to the right).


  6. After performing setup: always ensure that you force close the app then restart it.

  7. The Scanner will now be able to scan labels on the Terminal.


Helpful Tips for Android 6.0

  1. Reminder: After setup, always ensure you force close the app then restart it.
  2. If the scanner still does not work, perform the following steps:

    1. Use the Scanner to scan the Restore Factory Default for the scanner.
      1. Refer to page 63 of the ds2278 pdf to scan a real barcode, or refer to the Quick Start Guide that came with your Scanner.
      2. The below barcodes are not scannable, and are for reference only. Print these pages on a high-quality printer.


    2. Scan the Carriage Return/Line Feed barcode to add an Enter key.
      1. Refer to page 89 of the ds2278 pdf to scan a real barcode, or refer to the Quick Start Guide that came with your Scanner.
      2. Barcodes below are not scannable, and are for reference only. Print these pages on a high-quality printer.


    3. After performing both scanning steps: force close and restart the app, then test the Scanner.

    • Related Articles

    • Zebra ZD 411 - Indicator Lights

      Indicator Lights The indicator lights located above the printer’s display also communicate the printer’s status. Status of Printer As Shown by Indicator Lights Indicator Lights What they indicate STATUS light steady green (other lights steady yellow ...

    • POS: Check Status Screen - Scanning the Barcodes of Checks

      Back Office Front End Receipt Navigation: Login BO then select Setting > Printer Templates > Front End Receipt On the Front End Receipt settings page: select the Additional Settings section. Select the corresponding box next to Barcode, and the ...

    • Hardware Installation Guide

      Please refer to our Site Requirements Guide to ensure your site is properly equipped for hardware installation. Ubiquiti Dream Router What's in the Box? 1- Ubiquiti Dream Router (pre-configured) 1- Power Cable 1- Ethernet Cable Connecting Power The ...

    • Back Office: Label Printer Template Settings

      Customize what Prints on Labels Sign into the Back Office and select a Store. On the left-side Navigation Panel, click Settings. On the Settings page, under Printer Templates click Label Templates. On the Label Template screen are the Template ...

    • POS: Operation - Printer Hardware Settings

      Back Office For more information on Printer and Receipt Template settings, see the following Knowledge Articles: Receipt Printers Kitchen Printers Kitchen Receipt Template POS On the Hardware Settings page, select the Printer Settings tab. It ...