Revonu POS Hardware Requirements

Revonu POS Hardware Requirements as of 5/1/2025 for existing devices and are subject to change. Revonu POS does not take responsibility for any malfunction based upon existing devices not provided by Revonu.

Please ensure that your POS devices meet or exceed these minimum specifications for optimal performance and compatibility with the software.

iOS:

• iPad | Tenth Generation or above

• iPad Pro 11" | Fourth Generation or above
  
  
• iPad Pro 12.9" | Sixth Generation or above
  

Android:

• RAM: Minimum 4 GB
• Storage: Minimum 8 GB
• OS Version: Android 11 and above
  
• Printer Cash Drawer Port: 12V
  

Windows:

• RAM: Minimum 4 GB
• OS: Windows 10/11
• Google Chrome Web Browser

• Related Articles

• Site Requirements Guide

  To ensure that your site is ready to install your Revonu POS hardware, please follow this Site Requirements Guide. Introduction Your business has already begun the implementation process, but there are a few onsite requirements you will need to ...

• Hardware Installation Guide

  Please refer to our Site Requirements Guide to ensure your site is properly equipped for hardware installation. Ubiquiti Dream Router What's in the Box? 1- Ubiquiti Dream Router (pre-configured) 1- Power Cable 1- Ethernet Cable Connecting Power The ...

• Internet Requirements

  Internet Requirements A stable broadband connection is required Minimum internet bandwidth of 25 Mbps of download and 10 Mbps of upload speed is required, subject to devices connected on the network. Available bandwidth is affected by local network ...

• POS: Operation - Printer Hardware Settings

  Back Office For more information on Printer and Receipt Template settings, see the following Knowledge Articles: Receipt Printers Kitchen Printers Kitchen Receipt Template POS On the Hardware Settings page, select the Printer Settings tab. It ...

• POS: Operation - Scale Hardware Settings

  Back Office See the Receipt Printer Knowledge Article. Connecting the Printer to the Scale On the Scale: connect the DB9 male side of the cable to the highlighted port. Connect the port supply to the highlighted port. Connect the scale cable to the ...